Resumo Introdução A cimentação adesiva, com cerâmicas puras, é um passo relevante no estabelecimento da longevidade de trabalhos protéticos, sendo estes os melhores materiais utilizados para a reposição de dentes perdidos, de forma a reabilitar o sorriso. O sistema cerâmico de zircônia não se beneficia do tratamento com ácidos e necessita de diferentes métodos para tratar sua superfície, visando à efetividade na união adesiva. Objetivo Avaliar os resultados de diferentes técnicas de jateamento e aplicação de agente de união desenvolvidas para metais e cerâmica de zircônia (Ceramill ZI®), por meio de ensaio de tração, em dois diferentes tratamentos de superfície. Material e método Foram preparadas 20 amostras de Ceramill Zi® (n = 20), em forma de cilindro, e unidas entre si por meio do cimento resinoso (Multilink®), formando 10 espécimes (n = 10). Formaram-se sete grupos experimentais com os mesmos 10 espécimes e estes receberam dois tratamentos de superfície diferentes: abrasão e aplicação de agentes silânicos de união. Resultado A análise estatística mostrou diferenças significativas na resistência à fratura dos espécimes silicatizados com Rocatec®. Os valores de resistência de união à tração, mensurados em MPa, dos grupos 1 a 7, foram, respectivamente: 2,27; 4,48; 8,06; 8,32; 9,15; 10,56 e 10,70. As médias entre os grupos se apresentam estatisticamente significantes, exceto entre os grupos 3 e 4 e entre 6 e 7. Conclusão Os resultados mostraram que o tratamento da superfície cerâmica baseado no método de silicatização promoveu melhor união nos ensaios com Ceramill ZI® e cimentados com Multilink®.

Abstract Introduction Adhesive cementation, with pure ceramics, is a relevant step in establishing the longevity of prosthetic works. Being these, the best materials used for the replacement of lost teeth, in order to rehabilitate the smile. The ceramic zirconia system does not benefit from the treatment and planning needs for its surface, effectively in adhesive therapy. Objective Evaluate the results of different blasting techniques and application of bonding agent for metals and ceramics (Ceramill ZI®) by means of a tensile test in two different surface treatments. Material and method Twenty samples of Ceramill Zi® (n = 20), cylindrical and joined with resin cooling (Multilink®), were prepared, forming 10 specimens (n = 10). The first 10 ingredients were formed by 7 experimental groups and they received 2 surface problems: abrasion and application of silane bonding agents. Result The research resulted in fracture resistance of Rocatec® silica specimens. The values of tensile strength, measured in MPa, of groups 1 to 7, were: 2.27; 4.48; 8.06; 8.32; 9.15; 10.56 and 10.70. We observe how to enter the groups are statistically significant, except between groups 3 and 4 and between 6 and 7. Conclusion The results of the ceramic surface treatment were based on no silicate method, promoting the union of results with Ceramill ZI® and cemented with Multilink®.

Resumo Introdução Para reabilitação de mandíbulas totalmente edêntulas, a opção por carga imediata determina a utilização de próteses provisórias que esplintem os implantes instalados. Apesar de provisórias com reforço proverem as reabilitações com benefícios biomecânicos, a não adoção desta indicação coexiste em diferentes estudos sobre restaurações imediatas. Objetivo Este estudo avaliou um tipo de prótese para reabilitar mandíbulas pelo conceito “all-on-four”. Material e método: Foi avaliado, in-vitro, o comportamento mecânico de próteses com a infraestrutura modificada, sob ensaio mecânico de flexão unilateral em cantilever. Foram avaliados dois grupos representativos para o conceito “all-on-four”, sendo um grupo teste G1 (n = 10) contendo próteses com infraestrutura modificada e outro controle G2 (n = 10) que incluiu próteses totalmente acrílicas. As amostras foram submetidas à ciclagem térmica com 500 ciclos (5° ± 2 °C por 30 segundos e 55° ± 2 °C pelo mesmo tempo) e submetidas ao ensaio mecânico à flexão sobre o cantilever. Resultado O teste de Mann-Whitney revelou diferença significativa entre G1 e G2 (p<0,001). Na avaliação descritiva, G1 mostrou média de 830,50 N até a fratura inicial em resina e o grupo controle apresentou média de 403,58N. A resistência máxima até a fratura completa foi de 903,03 N para G1 e para G2 de 435,20 N. O componente vertical linear de flexão foi 0,68 mm e 0,39 mm até a fratura inicial da barra, respectivamente para G1 e G2. Conclusão A infraestrutura modificada para o protocolo “all-on-four” proporcionou melhor desempenho mecânico quando comparado ao mesmo modelo de prótese totalmente acrílico.

Abstract Introduction For complete rehabilitation of fully edentulous mandibles, the option for immediate loading determines the use of temporary prostheses that splint the installed implants. Although temporary prostheses with reinforcement provide rehabilitations with biomechanical benefits, the non-adoption of this recommendation coexists in different studies on immediate restorations. Objective This study evaluates a type of prosthesis to restore jaws by the all-on-four concept. Material and method: The mechanical behavior of prostheses with the modified framework was evaluated in vitro, under a cantilever mechanical unilateral bending test. Two representative groups were included in the all-on-four concept, with a G1 test group (n = 10) containing modified frameworks and a G2 control group (n = 10) that included full acrylic prostheses. The samples were submitted to thermal cycling with 500 cycles (5° ± 2 °C for 30 s, and 55° ± 2° for 30 s) and to the mechanical bending test on the cantilever. Result The Mann-Whitney test revealed a significant difference between G1 and G2 (p <0.001). In the descriptive evaluation, G1 averaged 830.50 N until the initial resin fracture, while the control group presented a mean of 403.58N. The maximum resistance until complete fracture was recorded in G1, with a mean of 903.03N, while in G2, a mean of 435.20N was recorded. The linear vertical component of the flexion was 0.68 mm and 0.39 mm until the initial fracture of the bar, respectively for G1 and G2. Conclusion The modified framework for the all-on-four protocol determined better mechanical performance when compared to the same full acrylic prosthesis model.

Resumo Este ensaio clínico controlado e randomizado avaliou o efeito da associação de procedimentos de clareamento caseiro e de consultório na sensibilidade dental (SD) e efetividade clareadora. Quarenta pacientes receberam uma sessão de clareamento de consultório com peróxido de hidrogênio a 38%. Em seguida, os pacientes foram aleatoriamente alocados para receberem uma segunda sessão de clareamento de consultório ou para usar uma moldeira com peróxido de carbamida a 10% por 7 dias consecutivos. O pior score de SD relatada durante ou após cada procedimento clareador foi mensurado usando uma escala verbal, e o risco a SD (escore diferente de 0) foi calculado. Mudança de cor foi mensurada 7 dias após cada sessão de clareamento de consultório (para paciente submetidos a apenas procedimentos de consultório) ou após o fim do clareamento de caseiro (para o protocolo combinado) e 6 meses após o último procedimento clareador para os dois protocolos de clareamento. A cor foi mensurada através de um espectrofotômetro e pelo uso das escalas Vita Clássica e Bleach guide. As análises estatísticas foram realizadas para verificar possíveis diferenças em relação aos desfechos e para analisar o efeito do momento da mensuração nas mudanças de cor. O protocolo clareador não afetou o risco e o nível máximo de SD relatado, independentemente do tempo de avaliação. Na avaliação de cor, o protocolo clareador também não afetou a cor final dos dentes. Como conclusão, após uma sessão de clareamento de consultório, não há diferença na efetividade clareadora e na SD em realizar uma segunda sessão de consultório ou associá-la com uma semana de clareamento caseiro.

Abstract This controlled randomized clinical trial evaluated the effect of associating at-home and in-office bleaching procedures on tooth sensitivity (TS) and bleaching effectiveness. Forty patients subjected to on session of in-office bleaching with 38% peroxide hydrogen. Subsequently, the patients were randomly allocated to receive a second session of in-office bleaching or to use a tray containing 10% carbamide peroxide delivered during 7 consecutive days. The worst TS score reported during or after each bleaching procedure was recorded using a verbal rating scale and TS risk (score different from 0) was calculated. Color changes were measured 7 days after each in-office session (for patients receiving in-office procedures only) or after the end of at-home bleaching (for the combined protocol), and 6 months after the last procedure for both bleaching protocols. Color was assessed by a spectrophotometer and by color match with the Vita Classical and Bleach guide scales. Statistical analyses were carried out to assess possible differences between the protocols regarding the outcomes and to analyze the effect of time of assessment on color changes. The bleaching protocol did not affect the risk for and the maximum level of TS reported, irrespective of the time of assessment. In the color evaluation, the bleaching protocol also did not affect the ultimate tooth color. In conclusion, after one in-office bleaching session, there was no difference in bleaching effectiveness and TS between performing a second in-office session and associating it with 1-week at-home bleaching.

ABSTRACT: The objective of this study was to verify the influence of the use of Class II intermaxillary elastics on centric relation (CR) to centric occlusion (CO) occlusal discrepancy. A total of 30 patients had been at the contention stage for at least three months were divided in two groups: G1 - 15 had been submitted to intramaxillary orthodontic mechanics only, and G2 - 15 had used Class II intermaxillary elastics. Distances of horizontal and vertical overlap and the distance or coincidence of the mandibular dental midline in relation to the maxillary midline were measured in CR and CO positions. Intergroup comparisons were performed using the Mann-Whitney test. No statistically significant differences (P>0.05) were found between G1 and G2. Both in the horizontal and vertical directions, these discrepancies were smaller than or equal to 1mm in 96.66 % of the patients. In the transverse plane, there was no discrepancy in 63.33 % of the patients, and in 33.33 % these discrepancies were equal to 0.5 mm. The use of Class II elastic didn't be capable of increasing the occlusal discrepancies between CR and CO.

RESUMEN: El objetivo de este estudio fue verificar la influencia del uso de los elásticos intermaxilares Clase II en la discrepancia oclusal entre la relación céntrica (RC) y la oclusión céntrica (OC). Un total de 30 pacientes que permanecieron en la fase de contención durante al menos tres meses se dividieron en dos grupos: G1 - 15 fueron sometidos solamente a la mecánica ortodóncica intramaxilar, y G2 - 15 habían utilizado elásticos de clase II intermaxilar. Se midieron las distancias de traslapo horizontal y vertical y la distancia o coincidencia de la línea mediana dentaria mandibular con respecto a la línea mediana maxilar en las posiciones RC y OC. Las comparaciones entre grupos se realizaron mediante la prueba de Mann-Whitney. No se encontraron diferencias estadísticamente significativas (P> 0.05) entre G1 y G2. Tanto en las direcciones horizontal como vertical, estas discrepancias fueron menores o iguales a 1 mm en el 96,66 % de los pacientes. En el plano transversal, no hubo discrepancia en el 63,33 % de los pacientes, y en un 33,33 % estas discrepancias fueron iguales a 0,5 mm. El uso de la clase II elástica no logró aumentar las discrepancias entre RC y OC.

OBJECTIVES: In some clinical situations, dentists come across partially edentulous patients, and it might be necessary to connect teeth to implants. The aim of this study was to evaluate a metal-ceramic fixed tooth/implant-supported denture with a straight segment, located in the posterior region of the maxilla, when varying the number of teeth used as abutments. MATERIAL AND METHODS: A three-element fixed denture composed of one tooth and one implant (Model 1), and a four-element fixed denture composed of two teeth and one implant (Model 2) were modeled. A 100 N load was applied, distributed uniformly on the entire set, simulating functional mastication, for further analysis of the SEQV (Von Mises) principal stresses, which were compared with the flow limit of the materials. RESULTS: In a quantitative analysis, it may be observed that in the denture with one tooth, the maximum SEQV stress was 47.84 MPa, whereas for the denture with two teeth the maximum SEQV stress was 35.82 MPa, both located in the region between the pontic and the tooth. CONCLUSION: Lower stresses were observed in the denture with an additional tooth. Based on the flow limit of the materials, porcelain showed values below the limit of functional mastication.

OBJECTIVES: This study evaluated by three-dimensional finite element analysis the tensions generated by different disocclusion patterns (canine guide and bilateral balanced occlusion) in an implant-supported mandibular complete denture. MATERIAL AND METHODS: A three-dimensional model of implant-supported mandibular complete denture was fabricated according to the Brånemark protocol. A 5-element 3.75 x 13-mm screw-shape dental implant system was modeled for this study. The implants were located in the inter-mental foramen region with 3-mm-high prosthetic components joined by a nickel-chromium framework with 12-mm bilateral cantilever covered by acrylic resin and 12 acrylic denture teeth. SolidWorks® software was used before and after processing the simulations. The mechanical properties of the components were inserted in the model and a 15 N load was established in fixed points, in each one of the simulations. Data were collected in the entire nickel-chromium framework. The results were displayed three-dimensionally as color graphic scales. RESULTS: The canine guide generated greater tensions in the region of the first implant, while the bilateral balanced occlusion generated great tensions in the entire metallic framework. The maximum tension found in the simulation of the bilateral balanced occlusion was 3.22 fold higher than the one found in the simulation of the disocclusion in canine guide. CONCLUSION: The pattern of disocclusion in canine guide is the ideal for implant-supported mandibular complete denture.

A comparative and qualitative analysis of the tensions generated in the cantilever region of an implant-supported mandibular complete denture was conducted using the three-dimensional finite element method. The mechanical properties of the components were input in the model and a load of 15 N was applied in pre-determined points. In the first simulation, the load was applied on the occlusal surface of the first premolar. In the second simulation, it was applied on the first and second premolars. In the third simulation, it was applied on the first and second premolars and on the first molar. The different occlusion patterns produced similar tension distributions in the cantilever region, which followed a similar pattern in the three simulations. In all of the cases, the highest levels of tension were located in the region of the first implant. However, as the loads were dislocated distally, the tensions increased considerably. The more extensive the cantilever, the more compromised will be the infrastructure, the prosthetic components and the implants. Regardless of the length of the cantilever, the highest tensions will always be located in the region of the implant next to the load application point.